Instructions for updating the firmware SVEN SB-2035

To update the firmware, you need to do the following

1) Write the ****.MVA firmware file to a USB flash drive (up to 4Gb). The USB flash drive must be formatted in FAT32, the USB flash drive must contain only the firmware file;
2) Turn on the device, wait for the sound information about the selected mode, insert the USB flash drive into the USB port of the soundbar;
3) When the firmware is complete, the device will turn off (the indicator will be red).
4) Remove the USB flash drive from the USB port of the soundbar;
5) Turn on the device
6) The update is complete.